Electrochemical analysis of the corrosion resistance of annealed steel with nickel coating in marine environment simulations: chronoamperometric and voltametric study
DOI:
https://doi.org/10.56183/iberotecs.v4i1.641Palavras-chave:
Corrosion resistance; annealed steel wire; marine construction applications; electrodeposition processResumo
This study conducts a comprehensive investigation into the corrosion resistance of annealed steel wire, commonly used in marine construction, emphasizing its importance for the material's durability and functionality in such applications. An innovative approach was implemented by applying a Nickel (II) Chloride Hexahydrate coating through electrodeposition. This process was meticulously adjusted, varying critical parameters such as exposure time and electrical potential. To mimic marine corrosive conditions, a Sodium Chloride solution was used, allowing for a detailed comparative analysis between coated and uncoated samples. The evaluation was based on rigorous quantitative measurements of the wire's surface state and corrosion potential, using TAFEL curves for precise interpretation. The findings empirically demonstrated that the coating significantly enhances corrosion resistance, markedly outperforming untreated steel. These results reinforce the proposition of nickel electrodeposition as an effective and viable strategy for corrosion protection in marine industrial applications.
Referências
Gąsiorek, J., Szczurek, A., Babiarczuk, B., Kaleta, J., Jones, W., & Krzak, J. (2018). Recubrimientos de sílice Sol-Gel funcionalizables para mitigar la corrosión. Materiales (Basilea, Suiza), 11(2), 197. https://doi.org/10.3390/ma11020197.
Wu, H., Luo, Y., & Zhou, G. (2023). Corrosion behaviors and mechanical properties of Q235 steel pipes collapsing due to corrosion after 25-year service in urban industrial atmospheric environment. Construction and Building Materials, 395, 132342. https://doi.org/10.1016/j.conbuildmat.2023.132342
Cui, M., Huang, H., Wu, H., Zhang, L., & Yan, J. (2023). Achieving superhydrophobicity of Zr-based metallic glass surface with anti-corrosion and anti-icing properties by nanosecond laser ablation and subsequent heat treatment. Surface and Coatings Technology, 130159. https://doi.org/10.1016/j.surfcoat.2023.130159
Jia, J., Cheng, X., Yang, X., Li, X., & Li, W. (2020). A study for corrosion behavior of a new-type weathering steel used in harsh marine environment. Construction and Building Materials, 259, 119760. https://doi.org/10.1016/j.conbuildmat.2020.119760
Qu, F., Li, W., Dong, W., Tam, V. W., & Yu, T. (2021). Durability deterioration of concrete under marine environment from material to structure: A critical review. Journal of Building Engineering, 35, 102074. https://doi.org/10.1016/j.jobe.2020.102074
Tozar, A., & Karahan, İ. H. (2020). Effect of octylphenyl ether group nonionic surfactant on the electrodepositon of the hexagonal boron nitride reinforced Ni-B matrix composite coatings. Surface and Coatings Technology, 381, 125131. https://doi.org/10.1016/j.surfcoat.2019.125131
González, M. B., & Saidman, S. B. (2011). Electrodeposition of polypyrrole on 316L stainless steel for corrosion prevention. Corrosion Science, 53(1), 276-282. https://doi.org/10.1016/j.corsci.2010.09.021
Kim, R., Choi, D., Shin, K. Y., & Han, D. (2021). Amorphous Sn–Ni islets with high structural integrity as an anode material for lithium-ion storage. Journal of Alloys and Compounds, 879, 160416. https://doi.org/10.1016/j.jallcom.2021.160416
Yin, ZZ., Zhang, ZQ., Tian, XJ. et al. Corrosion Resistance and Durability of Superhydrophobic Coating on AZ31 Mg Alloy via One-Step Electrodeposition. Acta Metall. Sin. (Engl. Lett.) 34, 25–38 (2021). https://doi.org/10.1007/s40195-020-01168-z
Youssef, K. M., Koch, C. C., & Fedkiw, P. S. (2004). Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition. Corrosion Science, 46(1), 51-64. https://doi.org/10.1016/S0010-938X(03)00142-2
Song, R., Zhang, S., He, Y., He, T., Li, H., Liu, B., ... & He, Y. (2022). Silicon nitride nanoparticles reinforced the corrosion resistance of Ni-Cu composite coating in simulated seawater solution. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 649, 129427. https://doi.org/10.1016/j.colsurfa.2022.129427
Wall, C., Zhao-Karger, Z., & Fichtner, M. (2015). Corrosion resistance of current collector materials in bisamide based electrolyte for magnesium batteries. ECS Electrochemistry Letters, 4(1), C8. DOI 10.1149/2.0111501eel
Djoko, H. P., Umar, E., & Dani, G. S. (2020). Evaluation corrosion behavior on commercial stainless steel SS 304 in Nano fluids water-Al2O3 system at different pH by Electrochemical Impedance Spectroscopy methods. In Journal of Physics: Conference Series (Vol. 1428, No. 1, p. 012025). IOP Publishing. DOI 10.1088/1742-6596/1428/1/012025
Mukherjee, J., Adalder, A., Mukherjee, N., & Ghorai, U. K. (2023). Solvothermal synthesis of α–CuPc nanostructures for electrochemical nitrogen fixation under ambient conditions. Catalysis Today, 423, 113905. https://doi.org/10.1016/j.cattod.2022.09.011
Hui, Y., & Webster, R. D. (2011). Absorption of water into organic solvents used for electrochemistry under conventional operating conditions. Analytical chemistry, 83(3), 976-981. https://doi.org/10.1021/ac102734a
Innis, P. C., Mazurkiewicz, J., Nguyen, T., Wallace, G. G., & MacFarlane, D. (2004). Enhanced electrochemical stability of polyaniline in ionic liquids. Current Applied Physics, 4(2-4), 389-393. https://doi.org/10.1016/j.cap.2003.11.056
AVSTENITNIH, P. K. L. (2014). Comparison of the corrosion behaviour of austenitic stainless steel in seawater and in a 3.5% NaCl solution. Materiali in tehnologije, 48(6), 937-942.
Sherif, E. S. M. (2012). Corrosion behavior of magnesium in naturally aerated stagnant seawater and 3.5% sodium chloride solutions. International Journal of Electrochemical Science, 7(5), 4235-4249. https://doi.org/10.1016/S1452-3981(23)19534-4
Pareek, S., Jain, D., Behera, D., Sharma, S., & Shrivastava, R. (2021). A review on inhibitors alleviating copper corrosion in hostile simulated sea-water (3.5 wt.% NaCl solution). Materials Today: Proceedings, 43, 3303-3308. https://doi.org/10.1016/j.matpr.2021.01.966
Downloads
Publicado
Edição
Seção
Licença
Copyright (c) 2024 Francisco Augusto Núñez-Perez
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
